PRODUCTS DETAIL

Product Core Advantage
(1)Ultra long lifespan, reducing maintenance costs
Data support: High quality 3030 lamp beads are used, with low light decay rate and a normal lifespan of up to 100000 hours (calculated based on 12 hours of daily use, it can be used continuously for 22 years), far exceeding the lifespan of traditional high-pressure sodium lamps of 50000 hours.
Actual value: Taking a port with 100 high pole lights as an example, traditional lighting fixtures need to be replaced on average every 3-5 years, with a labor and lighting cost of approximately $800 per replacement; By using this product, it only needs to be replaced 1-2 times within 20 years, which can save over $150000 in maintenance costs cumulatively.
(2)High protection performance, adaptable to complex environments
Protection level: IP67 waterproof and dustproof, passing high and low temperature cycling tests from -40 ℃ to 60 ℃, 24-hour immersion test at a depth of 1 meter underwater, and 500 hour salt spray test. It can adapt to extreme environments such as seaside, high cold, and high temperature.
Actual case: A container terminal in Qingdao will install 50 pieces of this product in 2020. After three years of typhoon, rainstorm, high humidity and high salinity, the failure rate of lamps is only 2%, far lower than the industry average failure rate of 8%; Meanwhile, the failure rate of other brands of lighting fixtures installed during the same period has reached 15%.
(3)Efficient and energy-saving, reducing operating costs
Energy saving data: Under the same lighting effect, this product can replace traditional 400W high-pressure sodium lamps with a power of 150W, achieving an energy saving rate of 62.5%; Each lamp is used for 10 hours a day, and based on an industrial electricity consumption of 0.15 USD/kWh, a single lamp can save approximately 98 USD in electricity costs per year.
Customer feedback: In 2021, a sports center in Guangzhou replaced 20 traditional 400W high pole lights with the 150W model of this product. One year later, statistics showed that the average illuminance in the lighting area increased from 200lux to 350lux, and the annual electricity bill expenditure decreased from 36000 US dollars to 13800 US dollars, saving 22200 US dollars in electricity bills.
(4)Accurate light distribution to meet diverse needs
Light distribution scheme: Provides 3 types of light distribution angles (15 ° narrow angle, 60 ° medium angle, 120 ° wide angle), which can be customized according to different scenes; Adopting optical grade PMMA lens, the transmittance reaches 93%, the spot uniformity is ≥ 85%, and there is no glare or dark area.
Scenario adaptation: 15 ° narrow angle suitable for port shore bridges and large tower cranes (illumination distance up to 80 meters); The 60 ° angle is suitable for sports stands and highway toll stations; 120 ° wide-angle is suitable for city squares and logistics parks.
Detailed Technical Parameters
| parameter category | Specific parameters | Remarks |
| Light source parameters | Lamp bead model: 3030; Color temperature: 5000K (normal white)/6500K (cool white); Color rendering index: Ra ≥ 70; Initial luminous flux: 150W-22500lm; 200W-30000lm; 250W-37500lm | Customized 3000K warm white light according to customer needs |
| Electrical parameters | Input voltage: AC100-277V 50/60Hz; Power factor: PF ≥ 0.95; Total harmonic distortion: THD ≤ 15%; Protection level: IP67; Insulation Class: Class I | Adapt to voltage standards of most countries worldwide |
| structural parameters | Shell material: ADC12 die cast aluminum alloy; Heat dissipation method: natural convection heat dissipation; Installation method: U-shaped bracket installation/flange installation | The flange size can be customized |
| environmental parameters | Working temperature: -40 ℃~60 ℃; Storage temperature: -50 ℃~70 ℃; Wind resistance level: ≤ 12 (wind speed ≤ 32.6m/s); Seismic grade: IK08 | Meet the climate conditions of most regions around the world |
Application Scenarios
(1) Sports Stadium/Gymnasium
Scenario requirements: It is necessary to meet the high illumination requirements for competitions, training, and audience viewing, without glare affecting the athletes' vision.
Product application: Recommended models range from 200W to 250W, with a 60 ° mid angle light distribution. The average illuminance can reach 300-500lux, which meets the lighting standards of the International Association of Athletics Federations (IAAF) competition venues; Case: A sports center stadium in Wuhan installed 36 250W products and successfully held the National Athletics Championships, receiving the evaluation of "excellent lighting effect" from the event organizing committee.

(2) Port/Pier
Scenario requirement: It is necessary to penetrate fog, resist high salt and humidity, illuminate containers, shore bridges, and yards, and ensure the safety of night operations.
Product application: Recommended models 150W-200W, equipped with 15 ° narrow angle light distribution, with an irradiation distance of 60-80 meters, IP67 protection+salt spray testing to ensure durability; Case: A container terminal at Zhoushan Port in Ningbo installed 42 units of 200W products, resulting in a 40% increase in visibility during nighttime operations and a 15% increase in loading and unloading efficiency, without any safety accidents caused by insufficient lighting.

(3) Airport/highway
Scenario requirement: It is necessary to evenly illuminate the runway, apron, and toll station, without glare affecting the driver/pilot's line of sight, and adapt to the large temperature difference between day and night.
Product application: Recommended 250W model (120 ° wide-angle) for airport apron, with an average illuminance of ≥ 200lux; Recommended for highway toll stations is the 150W model (60 ° mid angle) with a color temperature of 5000K (normal white) to reduce visual fatigue; Case: A certain apron at Kunming Changshui International Airport installed 28 250W products, which started normally in a low temperature environment (-10 ℃), and the lighting stability was recognized by the airport operation and maintenance department.

(4) City Square/Logistics Park
Scenario requirements: A wide range of soft lighting is needed, covering areas with crowds and vehicular traffic, while also balancing energy efficiency and aesthetics.
Product application: Recommended 150W model (120 ° wide-angle), color temperature 4000K (neutral white), uniform light spot without dark areas; Case: In a city square in Shenzhen, 18 150W products were installed to replace traditional 250W metal halide lamps, saving $12000 in electricity costs annually and increasing citizens' nighttime activity safety ratings by 30%.

Hot Tags: led high mast flood lights, China led high mast flood lights manufacturers, suppliers, factory, high mast lamp, illuminating, street light, outdoor lamp, roadway light, energy-efficient lamp
