Split Solar Street Light

Split Solar Street Light

Details
Split solar street lights are a new generation of intelligent outdoor lighting solutions, consisting of four independent parts: solar panels, lithium batteries, controllers, and LED lamp heads. Through modular design, flexible installation and maintenance are achieved. The product adopts monocrystalline silicon solar panels (conversion efficiency ≥ 20%) and lithium iron phosphate batteries (cycle life ≥ 3000 times), combined with an intelligent MPPT controller, which can operate stably in extreme environments from -20 ℃ to 60 ℃. It is suitable for rural roads, industrial parks, parking lots, scenic spots and other scenarios, providing all-weather zero electricity lighting.
Category
Solar Street Light
 
Send Inquiry
Description
Technical Parameters

Split solar street lights are a new generation of intelligent outdoor lighting solutions, consisting of four independent parts: solar panels, lithium batteries, controllers, and LED lamp heads. Through modular design, flexible installation and maintenance are achieved. The product adopts monocrystalline silicon solar panels (conversion efficiency ≥ 20%) and lithium iron phosphate batteries (cycle life ≥ 3000 times), combined with an intelligent MPPT controller, which can operate stably in extreme environments from -20 ℃ to 60 ℃. It is suitable for rural roads, industrial parks, parking lots, scenic spots and other scenarios, providing all-weather zero electricity lighting.

Solra Street light

 
 
Product advantages
01.

Efficient conversion of light energy

The conversion rate of monocrystalline silicon solar panels reaches 23%, the MPPT controller charging speed is increased by 30%, and it can be fully charged in 8 hours of sunlight.

02.

Ultra long battery life and durability

Lithium iron phosphate battery has a cycle life of ≥ 3000 times, continuous lighting for 6-12 hours with full power illumination, and supports 3-7 days of battery life in rainy and cloudy weather

03.

Intelligent light control design

Dual mode automatic sensing of environmental brightness with light control and time control, intelligent dimming when pedestrians and vehicles pass by at night

04.

Convenient installation

The solar panel is separated from the lamp head and can be independently installed on roofs, walls, or lamp posts, reducing construction difficulty.

 

Technical Parameter

 

 

Project Parameter
Light Source LED (SMD3030 chip, light efficiency ≥160 lm/W)
Power Range 30W-200W (customizable)
Working voltage DC 12V/24V
Solar panels Monocrystalline silicon (5V-24V, 20W-150W)
Battery Type Lithium iron phosphate battery (3.2V/12V, 12-100Ah)
Lighting Time 6-12 hours (full power)+3-7 days of rainy and cloudy battery life
Operation Temperature -30 ℃ to 60 ℃
Protection Grade IP66

 

Application Scenarios

 

product-1802-1152

Rural roads and remote areas

No need for power grid, reduced construction costs by 70%, and easy maintenance.

product-1800-1152

Industrial parks and parking lots

Intelligent dimming reduces light pollution and extends battery life.

product-1700-1088

Scenic spots and parks

Concealed installation, integrated with natural landscapes.

Installation Process

 

 

 
Infrastructure

Pour concrete base (recommended size: 40cm × 40cm × 60cm).
Pre embed anchor bolts to ensure that the lamp post is vertical.

 
Component Installation

Lamp head fixation: Use M10 bolts to install the lamp head on the top of the lamp post.
Solar panel installation: Adjust the bracket angle to 30 ° (optimal sunlight angle) and fix it with stainless steel screws.
Battery and controller: Place in a waterproof battery box and connect the positive and negative poles (pay attention to polarity).

 
System commissioning

Connect the power supply and check the controller indicator light (green light constantly on is normal).
Test the light control function: block the solar panel, and the lamp head should light up within 30 seconds.

 

 

Customized Service

 
 
 

Power customization

30W-200W optional, supporting multiple lamp head combinations.

 
 
 

Color temperature customization

:3000K (warm light), 4000K (neutral light), 6000K (white light).

 
 
 

Appearance customization

Lamp body color (black/gray), solar panel size (1m x 0.5m to 2m x 1m).

 

 

 

Hot Tags: split solar street light, China split solar street light manufacturers, suppliers, factory, solar street light for humid climate, supplier of solar street lights, cable for solar street light, solar street light for rural communities, solar street light pole, mounting bracket for solar street light

Send Inquiry
Contact Us |KEHUA SOLAR Lights Up Your Path

Reliable traffic lighting solutions to overcome darkness and lead the way – we’ll get back to you quickly!

Contact now!